Line arrays
Large format 3-way line array loudspeaker
- Components
2 x 12″/10″/2 x 1.4″ - Dispersion 80°
- SPLmax 145 dB
- Weight 60 kg / 132 lb
- d&b Certified Pre-Owned
While no longer available as a new system, the J-Series lives on through d&b Remanufacturing. A Certified Pre-Owned J-Series provides the same internationally renowned sound reinforcement as a new system, with a drastically reduced carbon footprint.
Product description
The J8 is a 3-way design housing 2 x 12″ LF drivers, one hornloaded 10″ MF driver and two 1.4″ exit HF compression drivers with 3″ voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane. Due to the dipolar arrangement of the neodymium LF drivers the exceptional 80° horizontal constant directivity dispersion control is nominally maintained down to 250 Hz. The J8 is acoustically and mechanically compatible with the J12 loudspeaker. It can be used in columns of purely J8 loudspeakers or combined with J12s and / or with J-SUBs. The J8 cabinet is constructed from marine plywood and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, the side and rear panels incorporate four handles, and two NLT4F/M or NL8 connectors wired in parallel are also mounted at the rear.
Amplifiers
The 2-Way active J8 requires two channels of the D80/30D.
The following amplifiers can be used to drive the J8.
with 30D
with D80
145 dB
2 x 1.4″ exit compression driver
passive crossover network
optional 2 x NL8
14.2 x 43.3 x 22.4″
132 lb
1 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven
2 ≥ 250 Hz
